<!-- Begin
function emailCheck (emailStr) {

/* The following variable tells the rest of the function whether or not
to verify that the address ends in a two-letter country or well-known
TLD.  1 means check it, 0 means don't. */

var checkTLD=1;

/* The following is the list of known TLDs that an e-mail address must end with. */

var knownDomsPat=/^(com|net|org|edu|int|mil|gov|arpa|biz|aero|name|coop|info|pro|museum)$/;

/* The following pattern is used to check if the entered e-mail address
fits the user@domain format.  It also is used to separate the username
from the domain. */

var emailPat=/^(.+)@(.+)$/;

/* The following string represents the pattern for matching all special
characters.  We don't want to allow special characters in the address. 
These characters include ( ) < > @ , ; : \ " . [ ] */

var specialChars="\\(\\)><@,;:\\\\\\\"\\.\\[\\]";

/* The following string represents the range of characters allowed in a 
username or domainname.  It really states which chars aren't allowed.*/

var validChars="\[^\\s" + specialChars + "\]";

/* The following pattern applies if the "user" is a quoted string (in
which case, there are no rules about which characters are allowed
and which aren't; anything goes).  E.g. "jiminy cricket"@disney.com
is a legal e-mail address. */

var quotedUser="(\"[^\"]*\")";

/* The following pattern applies for domains that are IP addresses,
rather than symbolic names.  E.g. joe@[123.124.233.4] is a legal
e-mail address. NOTE: The square brackets are required. */

var ipDomainPat=/^\[(\d{1,3})\.(\d{1,3})\.(\d{1,3})\.(\d{1,3})\]$/;

/* The following string represents an atom (basically a series of non-special characters.) */

var atom=validChars + '+';

/* The following string represents one word in the typical username.
For example, in john.doe@somewhere.com, john and doe are words.
Basically, a word is either an atom or quoted string. */

var word="(" + atom + "|" + quotedUser + ")";

// The following pattern describes the structure of the user

var userPat=new RegExp("^" + word + "(\\." + word + ")*$");

/* The following pattern describes the structure of a normal symbolic
domain, as opposed to ipDomainPat, shown above. */

var domainPat=new RegExp("^" + atom + "(\\." + atom +")*$");

/* Finally, let's start trying to figure out if the supplied address is valid. */

/* Begin with the coarse pattern to simply break up user@domain into
different pieces that are easy to analyze. */

var matchArray=emailStr.match(emailPat);

if (matchArray==null) {

/* Too many/few @'s or something; basically, this address doesn't
even fit the general mould of a valid e-mail address. */

	   //Email address seems incorrect (check @ and .'s)
alert("Adresse e-mail semble incorrecte (vérifiez @ et. 'S)");
return false;
}
var user=matchArray[1];
var domain=matchArray[2];

// Start by checking that only basic ASCII characters are in the strings (0-127).

for (i=0; i<user.length; i++) {
if (user.charCodeAt(i)>127) {
alert("Adresse e-mail semble incorrecte.");
return false;
   }
}
for (i=0; i<domain.length; i++) {
if (domain.charCodeAt(i)>127) {
alert("Ths nom de domaine contient des caractères incorrects.");
return false;
   }
}

// See if "user" is valid 

if (user.match(userPat)==null) {

// user is not valid

alert("Adresse e-mail semble incorrecte.");
return false;
}

/* if the e-mail address is at an IP address (as opposed to a symbolic
host name) make sure the IP address is valid. */

var IPArray=domain.match(ipDomainPat);
if (IPArray!=null) {

// this is an IP address

for (var i=1;i<=4;i++) {
if (IPArray[i]>255) {
alert("Adresse e-mail semble incorrecte");
return false;
   }
}
return true;
}
// Domain is symbolic name.  Check if it's valid.
 
var atomPat=new RegExp("^" + atom + "$");
var domArr=domain.split(".");
var len=domArr.length;
for (i=0;i<len;i++) {
if (domArr[i].search(atomPat)==-1) {
alert("Adresse e-mail semble incorrecte.");
return false;
   }
}

/* domain name seems valid, but now make sure that it ends in a
known top-level domain (like com, edu, gov) or a two-letter word,
representing country (uk, nl), and that there's a hostname preceding 
the domain or country. */

if (checkTLD && domArr[domArr.length-1].length!=2 && 
domArr[domArr.length-1].search(knownDomsPat)==-1) {
alert("The address must end in a well-known domain or two letter " + "country.");
return false;
}

// Make sure there's a host name preceding the domain.

if (len<2) {
alert("Cette adresse ne conteint pas un nom d'hôte!");
return false;
}

// If we've gotten this far, everything's valid!
return true;
}

//  End -->
//======================================================
// JavaScript Document


function MM_preloadImages() { //v3.0
  var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
    var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
    if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
}

function MM_swapImgRestore() { //v3.0
  var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
}

function MM_findObj(n, d) { //v4.01
  var p,i,x;  if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
    d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
  if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
  for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
  if(!x && d.getElementById) x=d.getElementById(n); return x;
}

function MM_swapImage() { //v3.0
  var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
   if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
}
//-->
function ValideFrom()
{
var Fname=document.myform.name.value;
var Fmail=document.myform.mail.value;
var Fmessage=document.myform.message.value;

if(Fname==''){alert("Fill the Name PLEASE !"); return false;}
if(Fmail==''){alert("Fill the E-mail PLEASE !"); return false;}
if(Fmessage==''){alert("Fill the Message PLEASE !"); return false;}

	if(Fmail!=''){ if(!emailCheck(Fmail)){ return false;}}
			
	document.forms["myform"].submit();

}

function ClearFrom()
{
document.myform.name.value='';
document.myform.mail.value='';
document.myform.message.value='';

}